Off Grid Solar Power System
Off-grid solar systems are ideal for generating AC/DC electric power in residential areas, large construction sites, high-rise buildings, mining plants, temporary facilities and other locations. These solar systems are a portable solar power system featuring automatic control, automatic protection, remote monitoring, a compact structure, and a stable, reliable, and environmentally friendly performance. These solar power systems are also easy to use. As the solar power for household use ranges between 40 to 800W, these solar power systems are suitable for lighting and charging electronic items such as smartphones. These power systems are also used as a power source in areas where there is limited electricity supply or no access to electricity to begin with.
1）Both AC and DC loads can be powered.
2）Intelligent control design, using a microprocessor and special integrated control system
3）Multiple output ports: DC:5V/12V AC:220V(110V available）
4）Battery overcharge protection, over discharge protection, overload protection, reverse polarity protection, and high-precision temperature compensation
5）LED display system shows working status, battery voltage and AC output voltage in real time
6）Solar power charge, compatible with utility grid charging voltage
7）The special solar mounting system is easy to install and use
8）Expansibility of the modules: The system can be charged with solar power modules(18V) 1）≤150W/18V to realize rapid charging
Instructions for off-grid solar system
- Utilization of a single chip microcomputer and special software to achieve intelligent control
- Use of a highly accurate battery discharge rate for discharge control. The voltage at the end of discharge is the controlled point of the discharge rate curve after correction, which eliminates the inaccuracy caused by the simple over discharge of voltage control, thus conforming to inherent battery characteristics. Different discharge rates feature different end voltages.
- With overcharge, over discharge, electronic short out, overload protection, unique battery-reverse protection and other automatic control; The above protection does not damage any parts and does not burn the fuse.
- With the use of a serial PWM charging main circuit, the voltage loss of the charging circuit is reduced by about half compared with that of diode charging circuit, and the charging efficiency is 3% to 6% higher than that of non-PWM, which increases the consumption time. Lifting charge of over discharge recovery: the normal automatic control of direct/float charging gives the system a longer service life, as well as a high precision temperature compensation.
- All controls are industrial grade chips, which operate normally in hot, cold, and wet environments.
Solar Power System
- Use a single chip microcomputer and special program for intelligent automatic control
- Real-time monitoring of battery voltage, current, charge and discharge rate and environmental temperatures, multi-parameter dynamic compensation operation adjustment for over-charge and over-discharge control, thus achieving dynamic optimization control of our system to ensure the high stability, environmental adaptability, and reliability.
- Automatic control of overcharge, over discharge, electronic short out and overload protection
- Three automatic switching modes for charging controllers: lift, direct and float, which ensures the service life
- The inverter part features a high load impact resistance design to ensure the normal starting and driving capacity of high-power load.
- Long service life, the solar panel life can reach more than 25 years.
Solar off-grid inverter
- 12-bit A/D high-precision sampling ensures sampling accuracy
- Excellent EMC design
- Automatic identification of system voltage
- Efficient serial PWM charging mode, which extends the battery life and improves system
- Use power MOSFET as an electronic switch, no mechanical switch
- Wide applicability, automatic identification of day/night
- Use of a graphical dot matrix liquid crystal display and 4-button man-machine interface, with complete menu-style display and operation
- User-friendly browsing interface, which is convenient for various operations
- Complete setting and modification of control parameters in the field; load control with rich contents
- Three types of lead-acid battery charging procedures are optional: sealed, gel and flooded.
- Adopts temperature compensation to automatically adjust charging and discharging parameters, which improves battery life
- The controller features automatic protection functions for over temperature, over charge, over discharge, overload and short out
- Pure sine wave power
- CPU management, intelligent control and modular
- LED display, which can intuitively display all operating parameters
- High conversion efficiency, ranging from 90% to 98%; Low waste, in the sleep pattern, the loss is between 1W~6W; this solar inverter the best choice of solar/wind power generation system
- Strong loading capacity and load resistance, which can be applied to pumps, air conditioners, refrigerators, etc.; inverter rated power 1KW can supply energy for 1P air conditioning, inverter rated power 2KW can supply energy for 2P air conditioning, inverter rated power 3KW can supply energy for 3P air conditioning, etc. According to this characteristic, the inverter can be defined as dynamic inverter
- Uses the latest power frequency circuit design from the United States and brand new imported electronic materials, with good system stability, low failure rate and long service life, and the normal service life can reach more than eight years
- Perfect protection functions: low voltage, high voltage, high temperature, short out, overload protection
- Sleep pattern: in sleep pattern, the loss is 1W~6W, only the chip is working, and the inverter performs automatic cycle detection. When the connected load is greater than 30W, the system will automatically start up in 20s and enter the normal working pattern to supply power; When unloading (less than 30W), it will automatically enter the sleep pattern within 20s; This function greatly reduces the unnecessary power waste; This function is specially designed for energy saving.
- Maintenance-free lead-acid valve-controlled battery
- Unique lead paste formula and process design
- Wide operating range: -10~50℃
- Deep cycle design with high energy density
- Excellent cycling performance and over discharge recovery ability
- Imported gas-phase silica, unique gelling process, no stratification of electrolyte
- Extremely low grid corrosion rate and water loss rate for longer service life
- Excessive electrolytes to realize large heat capacity, heat dissipation performance and wide operating temperature range
We can also provide independent power generation system solutions according to your actual usage.
Founded in 2008, Shandong Jieyang New Energy Co. is a comprehensive source for solar power solutions. We do everything from design and manufacture of solar panels and photovoltaic power stations, as well as services like project consultation and construction. We have taken on many different solar power projects in China and around the world to the wide praise of customers. Our strength lies in our innovative capabilities and we are constantly developing new products and solutions. Our R&D team has led to 46 national patents along with numerous certifications.